The two buttons in the top left corner enable the effect for SEM 1 and 2 respectively.
When lock is enabled the effect parameters won’t change. Also holding effects over patch switching.
The depth or intensity of the effect is set with the Depth knob, changing how strongly the Phaser impacts the signal.
This mixes the level between the dry signal and the wet (phaser) signal. Anywhere over halfway will cause the delays to sound at a higher level than the original, dry signal.
<aside> ⚠️
The following parameters are only accessible on TVS Pro’s Sequencer/FX View.
</aside>
This allows adjustment of the phase rate. This variable is between 0.1 Hz and 5Hz when unsynchronised and 1/32nd of a beat and 1 Bar synchronised via the Phaser Sync Button.
Switches between unsynchronised and synchronised mode. Synchronised mode is used to sync the phaser times to that the host tempo of your DAW
Set the Number of Phases/Stages: 6 or 12. More stages result in a more complex and pronounced effect.