VCO 1

VCO 1 Frequency Knob

This control determines the initial frequency of Oscillator 1 in one-semitone increments over a four-octave range. By default Cmd/Ctrl+Click can access continuous values (based on the selected Smooth VCO tune adjustment modifier in the Settings window). Cmd+Shift+Click allows for fine adjustment.

VCO 1 Waveform Knob

This control determines the shape of the VCO 1 waveform. It’s a mix of two waveforms. Three combinations of these waveforms are available through the Waveform Switch. The knob is bipolar, with 50-50% at the centre position and 100% when turned fully clockwise or fully counterclockwise.

VCO 1 Waveform Switch

Three combinations of these waveforms are available through the Waveform Switch:

• Left position — Triangle anticlockwise and Saw fully clockwise.
• Centre position — Inverse Saw anticlockwise and Sine fully clockwise.
• Right position — Narrow Pulse anticlockwise and Wide Pulse fully clockwise (Square at the centre position).

VCO 1 Fine Tune Knob

The Fine Tune knob allows precise adjustment of the VCO 1 frequency.

VCO 1 Frequency Modulation Knob

This control determines the amount of “LFO” or “VCF envelope” (depending on the Frequency Modulation Switch) that modulates VCO 1’s frequency. It is bipolar, with 0% at the centre position, +100% when turned fully clockwise, and -100% when turned fully counterclockwise.

VCO 1 Frequency Modulation Switch

This control determines which of “LFO” or “VCF envelope” modulates VCO 1.

VCO 1 Waveform Modulation Knob

This control determines the amount of “LFO” or “VCF envelope” (depending on the Frequency Modulation Switch) that modulates VCO 1’s waveform shape. It is bipolar, with 0% at the centre position, +100% when turned fully clockwise, and -100% when turned fully counterclockwise.

VCO 1 Waveform Modulation Switch