<aside> ⚠️
Yes, we know the oscillators on most Prophet~5s are labelled A and B. However, we wanted to use A and B for the layers, so our oscillators are 1 and 2, like a Rev 1.
</aside>
Sets the frequency of oscillator 1 in steps. From -24 to +24.
Choose between a saw, pulse, both, or neither!
<aside> ⚠️
Seriously, neither is an option, and we’ve seen a few people get tripped up here. If no shape is selected, no sound will happen.
</aside>
Sets the duty cycle of the pulse wave. A square wave (50% duty) is played with the knob in its centre, default position. 0% and 100% duties are available to the lower and upper ranges of the knob.
When switched on, it enables hard sync between the two oscillators. Oscillator 1 will reset its wave-cycle to the beginning every time Oscillator 2 finishes a complete wave-cycle. The result is interesting harmonic content if the frequencies of the two oscillators differ.
Sets the frequency of oscillator 2 in steps. From -24 to +24.
Pitches the oscillator frequency upwards (only), by up to 100 cents. If you want a flat detune, you’ll need to set the main frequency down one and then turn this up.
Like Oscillator 1, multiple wave shapes can be combined as well as disabling all sound from the oscillator by having them all off. Saw and pulse are there, and osc 2 also has a triangle option.