Sets the depth of LFO modulation. If the wheel-mod source mix is set to include some LFO level, the mod wheel will increase the LFO depth from this amount to maximum. The destinations are selected in the Wheel-Mod section.
Sets the frequency of the LFO from 0.05Hz to 28Hz unsynced, and 4 bars to 1/32 note when tempo synced.
Enables tempo sync for the LFO, adjusting the speed and range of the LFO frequency knob.
Selects the shape of the LFO, with 2 saws (up and down), triangle, and square options. Whilst the two saw shapes cannot be combined with each other, they’re on the same button, the others can be combined to create complex modulation shapes.
<aside> ⚠️
It’s also possible to disable all shapes, and therefore output no modulation.
</aside>
Switches the shape buttons for the Sample and Hold controls. There’s also an LED here to show you when S&H is in use.
Enables or disables sample and hold.
Sets the rate at which the selected LFO shape is sampled. This level is then maintained until the next sample point. When combined with the LFO rate, can create stepped shapes with a slow LFO rate and a faster S&H rate, or less predictable sounds with faster LFO rates and mixed shapes. Also adheres to Tempo Sync if enabled.