<aside> ⚠️
This panel is in the extended section of Novation Bass Station. To view it, click the outward arrows icon in the header bar.
</aside>
Novation Bass Station comes with five built-in effects; High-Pass Filter, Distortion, Chorus, Delay & Reverb. Each of these effects can be turned on or off via the red LED in the top left of each effect section. It’s also possible to lock any or all of the effects so that you retain your current effects settings even when changing patches. To activate the Lock, click on the padlock at the top-right of each effect, whereupon it will become ‘greyed out’.
This is the high-pass filter's cutoff frequency. When set at 0, there is no frequency attenuation. The filter has a set Q factor to boost frequencies around the cutoff frequency.
Fine-tuning for the high-pass filter's cutoff frequency.
Set the high-pass filter's filter tracking from 0% up to 100% where it will fully track with the keyboard pitch.
Set the filter as a 2-pole or 4-pole filter.
Turning this clockwise progressively introduces distortion. Turning counter-clockwise reduces distortion.
As the name suggests, this alters the tone of the Distortion effect.
Set the Distortion type