The two buttons in the top left corner enable the effect for SEM 1 and 2 respectively.
When lock is enabled the effect parameters won’t change. Also holding effects over patch switching.
Sets the delay time of the left and right channels individually. In Sync mode, the delay times are from 1/32nd of a bar to 1 bar. In unsynchronised mode, the delay times are 125 to 4000 Milliseconds (4 Seconds).
This icon activates the Link mode.
When illuminated, if you change the left Delay Time value, the right time will also change to the same value, and vice-versa.
This icon activates the Sync mode.
The delay times are synchronised to host DAW’s tempo and given in beats when the Sync icon is illuminated. In standalone mode, the tempo is set in the tempo window.
Sets the level of delay output is routed back into the input.
Delay Amount sets the balance between the dry signal (containing no delay) and the wet signal (containing only the delay signal).
<aside> ⚠️
The following parameters are only accessible on TVS Pro’s Sequencer/FX View.
</aside>